water temperature meter
The instrument acts as a water thermometer that not only measures the sea surface temperature, but also acts as a current crack detector that sounds an alarm when the sea surface temperature exceeds a pre-set temperature range.
The temperature it detects can be displayed on other equipment via NMEA-0183.
It is also used for boat maintenance by checking the battery condition.
Current Tear Detection Function
Current tear detection can be set to detect current tears at 0.1°C/minute and 0.1°C/minute intervals.
9.9°C/minute range for real-time monitoring of sudden temperature changes.
Maximum/minimum water temperature setting function
By setting the time interval, any water temperature zone can be detected according to your purpose
0.1°C in the range between -9°C minimum and +40°C maximum.
Battery Check Function Battery check function
Monitor the battery voltage at any time by detecting the power supply voltage.
Battery check function Data transfer function
It transfers its data to other devices through the NMEA-0183 serial data transmitter.
Data transfer function Light Emitting Diode (LED) Display Function
The use of LEDs as the display realizes a clear display.
Also, the display characters are large, making them easy to recognize.
|
1. Water-temperature measuring part |
|
|
Temperature measuring range |
-9 ℃~40 ℃ operating temperature:-5 ℃~50 ℃ |
|
Accuracy |
±0.2 ℃ resolution : 0.1 ℃ |
|
Upper/lower limit setting range |
-9 ℃~40 ℃ setting precision : 0.1 ℃ |
|
Ocean current setting range |
0.1 ℃~9.9 ℃ temperature change per minute |
|
Temperature sensor |
Silicon thermistor sensor |
|
2. Common specification |
|
|
Display |
Light Emitting Diode (Flickers when alarm is activated) |
|
Sampling rate |
About 5 times / sec |
|
Battery check function |
Voltage measurement accuracy : ±0.5 V max |
|
Power supply |
DC 20V ~30V (for DC 24V) |
|
Outer dimension(mm) |
250 x 140 x 45 mm |
|
Weight |
2kg |